Automatic Bottle Cap Capping Machine
Capping machine is used to replace manual work to automatically seal the lid to the mouth of the bottle, suitable for a variety of bottle, lid packaging products industry. Such as drinks, pharmaceuticals, key products industry, etc. As there are many kinds of bottles and LIDS, there are many kinds of machines to meet these bottles and LIDS. According to the type and use of cap, it can be divided into: screw cap capping machine, pull ring cap, crown cap capping machine, aluminum cap capping machine, plastic cap capping machine, glass bottle vacuum cap capping machine, internal plug capping machine for daily chemical products, claw cap capping machine, aluminum foil cap capping machine and so on. According to torque control, it can be divided into interval magnetic torque capping machine, magnet capping machine, servo constant torque capping machine and so on. Usually the whole capping system is composed of lifting, managing, capping, conveying and removing mechanisms. The working flow of the screw capping machine used more frequently in daily life is as follows:
After the lid is poured into the hopper, it is lifted to the lid by the conveyor belt. The cap trimmer arranges the cap in a consistent direction and stores the cap in the pilot cap tunnel. When a bottle signal is detected, block the lid of the cylinder action, the lid then into the cover grab disc to follow the rotation of the disc, when the lid and the screw head vertical position coincide, the screw head will grab the lid; The cap and cap are then rotated and lowered to the top of the bottle, screwing the cap onto the top of the bottle. When the lid is tightened to a certain torque, the lower part of the capping head stops rotating to protect the lid from damage. After screw tightening, the inclined cap will be detected, and the unqualified bottles will be removed to ensure the qualified rate of the product; Every bottle that goes out is also tested to make sure that no "uncapped" product comes out.
Servo control of PLC, touch screen interface in both Chinese and English, the operation showed clear and easy to understand; The fault and status are clear.
Servo screw cap machine "a screw LIDS corresponding to a servo motor, guarantee the equipment under any working state, is stable and reliable, torque is consistent; The lifting curve can also be set at will to avoid complex mechanical structure.
Automatic screw cap machine with lifting motor, can realize the automatic lifting of the host;
Parts in contact with the bottle and cap are of 304 stainless steel material, plastic parts are all food grade, guarantee the health and safety.
Adjustment screw position with digital display, reduce operating difficulty, avoid adjustment does not reach the designated position caused by the screw cover not tight.
Optional cap guide, automatic screw cover machine can also be applied to take the lid of the pump head screw cap.
Automatic screw cap machine optional screw cover non-conforming and without foil inspection agencies.
All cap unscrewing torque adjustable.
Complete equipment form a complete set of data (including equipment structure, principle, operation, maintenance, repair, the explanatory data, such as the upgrade), give fully automatic screw cap machine normal operation to provide sufficient protection.
Production speed: 1000-30000 bottles/hour
Suitable for bottle caps: compatible with 99% of the current market
Capping method: lift capping or targeted capping machine
Capping mode: servo grip or downward pressure capping